Contact

Amy Fischbach
Contributing Editor

afischbach@tdworld.com

Amy Fischbach is...More about Amy Fischbach

AMSC India Formed to Address India’s Rapidly Growing Wind Energy and Power Grid Markets

New AMSC Division to Provide Applications Engineering, Sales and Field Service for Wind and Power Grid Markets


Initial Power Electronic System Orders Received from Two Indian Wind Turbine Manufacturing Customers


Wind Turbine Production Schedules on Track for AMSC Customers Ghodawat Energy and Inox Wind


DEVENS, MA – September 9, 2009 – American Superconductor Corporation (NASDAQ: AMSC), a global energy technologies company, today announced that it has formed AMSC India to serve India’s rapidly growing wind energy and power grid markets with AMSC’s power electronics and superconductor-based solutions. With its regional head office in Delhi and a service office in Pune, it will provide local applications engineering, sales, business development, and field service support.


“India is beginning to tap into its renewable energy resources and is making significant investments to vastly improve the throughput and reliability of its power grid,” said Greg Yurek, founder and chief executive officer of AMSC. “Our advanced power electronics and superconductor solutions are well positioned to address these needs both in the near and long term. AMSC India has been formed to provide high-quality local technical support for our new wind power customers and build a strong foundation for future sales into India’s broader renewable energy and power grid markets.”


According to the World Bank, roughly 40 percent of residences in India are without electricity, and blackouts are a common occurrence throughout the country’s main cities. To address this shortfall, the Indian government has established an ambitious “Power for All by 2012” plan that will require the country’s installed generation capacity to grow from 140,000 megawatts (MW) to nearly 225,000 MW by 2012. It also will require billions of dollars of investment in India’s transmission and distribution infrastructure.


According to the Global Wind Energy Council’s Global Wind 2008 Report, India now ranks fifth in the world in terms of total installed wind power capacity. Capacity in the country grew by 22 percent in 2008 to 9,600 MW. The Indian Wind Energy Association estimates that the country has 65,000 MW of wind power potential.


AMSC’s first two wind turbine manufacturing customers in India are Ghodawat Energy Limited and Inox Wind Limited. Both licensed AMSC Windtec™ turbine designs within the past 18 months. AMSC, which is the exclusive power electronic system supplier for all Ghodawat and Inox wind turbines, announced today that it has received initial orders for five wind turbine electrical systems from Ghodawat and three wind turbine electrical systems from Inox.


Ghodawat, based in Kolhapur in the state of Maharashtra, India, will use the electrical systems for its initial production of 1.65 MW wind turbines designed by AMSC Windtec. Ghodawat, in collaboration with AMSC Windtec and AMSC India, has successfully erected and tested its first reference 1.65 MW wind turbine.


Inox, located in Noida in the state of Uttar Pradesh, India, plans to begin volume production of 2 MW wind turbines designed by AMSC Windtec in 2010. Inox is in the process of collaborating with AMSC Windtec and AMSC India to erect its first reference wind turbine prior to initiation of volume production in 2010.


About American Superconductor (NASDAQ: AMSC)

AMSC offers an array of proprietary technologies and solutions spanning the electric power infrastructure – from generation to delivery to end use. The company is a leader in alternative energy, providing proven, megawatt-scale wind turbine designs and electrical control systems. The company also offers a host of Smart Grid technologies for power grid operators that enhance the reliability, efficiency and capacity of the grid, and seamlessly integrate renewable energy sources into the power infrastructure. These include superconductor power cable systems, grid-level surge protectors and power electronics-based voltage stabilization systems. AMSC’s technologies are protected by a broad and deep intellectual property portfolio consisting of hundreds of patents and licenses worldwide. More information is available at www.amsc.com.

PPC Santana begins the production of 800,000V bushing insulators in Brazil

foto-arthur-news.jpgPPC Santana, largest producer of insulators in Latin America, begins to produce of production of 800,000V bushing insulators and finish the installation of the largest extruders of ceramic material in Brazil.


September 3, 2009 — Within the 2009/2010 R$ 12 million investment program, PPC Santana begins to produce large porcelain “bushing” type insulators for the Latin American market.


An important step in the process has just been completed in the High Voltage Insulators unit of the company in Pedreira, SP: the installation of the largest extruders of ceramic material in Brazil. Designed and produced in Germany under the supervision of PPC Insulators in Europe, the high vacuum extruder is more than 10 meters long, and entirely built from stainless steel. The capacity exceeds 20 tons per cycle and is capable of extruding ceramic bodies more than 1 m in diameter.


According to Elias Oliveira, the director of sales at PPC Santana, another fundamental step to complete market services is being concluded. “PPC Santana was already ready and able to deliver solid core support insulators up to 800,000 Volts to the market, but was limited to 550,000 Volts regarding bushing insulators used in electrical equipment such as circuit breakers and current and potential transformers. With the installation of the new extruder, we began to produce some models in Brazil of 800,000 Volts, and this will allow us to offer the complete package to the market,” said the executive.


The CEO of PPC Santana, Arthur Lavieri, explains that increasing the productive capacity of PPC Santana and the technology transfer by PPC Insulators is part of the worldwide investment plan of the company. “The new extruder adds capacity to our line, and further improves the quality of our ceramic bodies. Our idea is to strengthen, regionally, the engineering structure, manufacturing and testing of high voltage insulators of PPC Insulators around the world. As we are the only factory in the Americas, this investment covers an important range of products and prepares us to service important clients in Brazil and the Americas”, said Lavieri.


First batches of the new PPC Santana extruder production were successfully tested during the last week of July.


About PPC Santana

Founded in 1941 in the city of Pedreira, SP, Cerâmica Santana started producing products for electrical insulation in the 40’s. With continuous investments in research and development, in the 70’s it became the largest producer of insulators in Latin America. In 1993, it changed its corporate name to Isoladores Santana. With approximately 1000 employees and 4 factories, it supplies the Brazilian and Latin American market, and selected clients in the United States, Canada, Middle East and Asia. In 2008, SEVES / PPC Insulators became a part of an international group and the company changed its name to PPC Santana. Its product line includes ceramic and polymeric insulators, which run from low voltage to 800,000 volts.


About PPC Insulators

As a result of the union of several American and European factories which took place during last decades, PPC Insulators has 13 factories in nine countries and exports to 100 countries. With 4500 employees scattered throughout the world, the company is the world leader in the manufacture and development of electrical porcelain insulators for all voltage levels. Since 2006, PPC Insulators has been part of SEVES S.p.A.

Sherman & Reilly Introduces Pole Framing Jack

dscf0007.JPGAugust 27, 2009 — Sherman & Reilly’s Model PD-40 Pole Framing Jack is an easy-to-carry tool that does a big job. Referred to as the “Pole Danny,” it is easily stored in a pickup truck and allows one man to frame wood poles on site before line crews are ready to set the completed pole.

High Voltage Inc. Provides Portable Testing Equipment for Wind Farms

hvi_scotland.jpgAugust 24, 2009, COPAKE, NY — High Voltage, Inc. serves the wind industry by providing portable VLF .1Hz Very Low Frequency AC hipots and AC HV Test equipment for proof testing the medium voltage collector cable circuits and switchgear commonly used on wind farms. The VLF .1Hz testing of wind farm power cable feeders and collector cable circuits per IEEE- 400.2 is a simple, cost effective, and conclusive quality assurance test method.


It definitively proves out the integrity of the workmanship, cable insulation and its associated accessories such as splices and joints. A VLF AC withstand test is an excellent test method for insuring the cable laying

and workmanship of the new installation is good and will provide reliable,

long-term power distribution to the distribution grid the wind farm serves.


High Voltage, Inc. also can supplement VLF withstand testing with Tan delta

testing diagnostics via a Tan delta bridge used in conjunction with a VLF AC

Hipot. By monitoring the tan delta readings of a cable circuit over time,

one can determine if a particular cable is beginning to show insulation

degradation commonly caused by water trees possibly leading to a cable fault disrupting power delivery. By discovering a suspect cable before a

catastrophic cable fault, plans can be made ahead of time to repair,

rejuvenate or replace the cable and splices during a controlled repair

outage minimizing power interruption and service failure.


These two testing methods (VLF & Tan delta) are the easiest, most time

proven, simple, and conclusive for wind farm managers and HV contractors to enhance and continuously provide a reliable installation and reliable

generation of power. High Voltage, Inc. is very familiar with all cable

testing technologies, and knows cables.


Contact:

31 County Rt. 7A, Copake, NY 12516

Phone: 518-329-3275

Fax: 518-329-3271

E-Mail: sales@hvinc.com

Web site: www.hvinc.com

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -


Agency Contact:

WALTER HEARN ASSOCIATES LLC

Design for Marketing

1099 Deerfield Dr. NW

Blacksburg, VA 24060

Phone: 540-951-2853

Fax: 540-951-0591

E-Mail: whearn@whearn.com

Web: http://www.whearn.com

HD Electric Company Transforms Retired Mobile Demonstration Van Into Bookmobile

On Tuesday, July 28, 2009 HD Electric Company participated in a bookmobile ribbon-cutting ceremony at the North Chicago Public Library in North Chicago, IL. HD Electric’s retired Mobile Demonstration Van, which has since been replaced by two fully-equipped Mobile Demonstration Trailers, was donated to the library through the help of the Gorter Family

Foundation of Lake Bluff, IL. The library will use the van as a full-service bookmobile that will travel the North Chicago area.


The vehicle’s interior was redesigned with custom shelving to hold the 2,000 books that the foundation purchased to stock the mobile library. The collection includes fiction, non-fiction and mystery books, as well as a bilingual selection for the city’s Hispanic population. A volunteer driver provided by the Friends of the Library organization is scheduled to begin

making rounds with the bookmobile in mid-August.


This donation helped grant the long-held wish of North Chicago library officials and board members. For years they have wanted to acquire a bookmobile, in order to bring a full-service mobile library to people who might otherwise not have been able to visit the North Chicago

Public Library. Through the project, they hope to spread a love for reading and learning, aspiring to create a “City of Readers.”


HD Electric is proud to participate in such a rewarding venture, and wishes much success to the library’s endeavors in the community.


For more information on HD Electric Company’s mobile demonstration units, visit its Web site at www.hdelectriccompany.com/more-information/about-us/mobile-demonstrations.htm.


Contact:

HD Electric Company

1475 Lakeside Drive

Waukegan, IL 60085 USA

Phone: 847-473-4980

www.HDElectricCompany.com

Mainstream Renewable Power Appoints North American Leader

Adrian LaTrace urges U.S. Utilities to Embrace Wind and Reduce Energy Bills


CHICAGO and DUBLIN, Aug. 6 — Mainstream Renewable Power, the global renewable energy company, has announced the appointment of Adrian LaTrace as chief executive of North America operations. LaTrace is the former vice president and general manager of Acciona Windpower North America. The appointment follows the company’s recent acquisition of a portfolio of wind farm projects in the state of Illinois with a potential capacity of 787 megawatts. It is expected these projects will be fully operational by 2013 and will produce enough power to supply almost 200,000 homes in the U.S.


Commenting on the appointment, Mainstream’s Chief Executive Officer Eddie O’Connor said, “We are witnessing the beginning of a meaningful diversification in the U.S. to incorporate clean energy sources for new power generation. Adrian has the right experience and the entrepreneurial spirit to help Mainstream Renewable Power drive the transition from fossil fuels to renewable wind energy. North America needs to develop its large-scale wind resources to capitalize on the long-term, sustainable benefits for utilities, economies and ultimately for consumers. More wind energy means lower energy bills; it’s as simple as that.”


LaTrace has more than 25 years of management experience in the wind energy, aerospace and electronics industries. In his role as vice president and general manager of Acciona Windpower North America, LaTrace had direct responsibility for business development, manufacturing operations, supply chain management, installation/commissioning and O&M services. LaTrace helped establish Acciona’s wind turbine manufacturing business in North America by leading the site selection, construction, and staffing of Acciona’s first wind turbine manufacturing facility in the U.S. His team built three wind farm projects in the U.S. totalling more than 400 megawatts. LaTrace has been a strong advocate for the industry on the benefits of wind power for the North American economy and environment.


“The biggest risk facing global utilities today is price uncertainty for commodities such as fuel,” LaTrace commented. “Mainstream’s experience and strong track record of funding and developing large-scale wind projects around the world makes us an ideal partner for utilities to help build out new wind capacity. Increasing the amount of indigenous, renewable energy to the generation mix provides a hedge against fuel price volatility, and has proven to drive down costs of the overall system. Utilities then can pass those savings onto consumers, decreasing their electricity bills.”


Mainstream’s business model involves selling operational wind farm assets to utilities, which LaTrace believes offer a natural home for these cash generating assets.


“It benefits them in three ways; first, it allows them to comply with either state or federal laws to increase the portion of renewable energy in their generation mix. Secondly, it offers a hedge against carbon-reduction compliance. Thirdly and most critically, because the fuel cost is fixed at zero, it replaces the more expensive fossil fuel generation and simultaneously reduces the demand for and price of fossil fuels,” said LaTrace. “We’ve researched extensively on the value of wind to generation systems and the conclusion is more wind means less cost.”


The Value of Wind

There is a perception that increasing the deployment of renewable generation will increase the price of electricity for consumers. However, the reality is the reverse: adding significant amounts of wind capacity to a country’s generation portfolio leads to lower overall generation costs, and to lower bills, while increasing energy security.


Wind is a free source of fuel. When the wind blows the electricity system has access to this free source and the power generated is automatically accepted onto the system. That electricity system is a combination of generation plants using different fuels and technologies, each with its own marginal cost. Operators bring plants on line in an ascending order of marginal cost and employ the same methodology when reducing output. In short, the most expensive plants are the last to be brought onto the system and the first to be shed.


When introduced, wind displaces this “low merit” or “peaking” plant. This is the “merit order” effect, where wind reduces both the marginal and average cost of power. Recent studies in Germany have shown the consumer benefit of this effect, in that the reduction in domestic electricity prices brought about by this fossil fuel displacement exceeds the amount paid out by the consumer in support mechanisms for renewable generation.


When wind energy is available in significant quantities it causes the demand for fossil fuels to fall and if it continues to blow for a prolonged period, as frequently happens in northern Europe, the expected future market price of electricity also falls. This phenomenon was clearly seen in Spain over the early months of 2009 where prices paid for electricity on the spot market were reported to have dropped by over 10 percent as production from wind plants increased relative to demand. A longer term study in Denmark has shown that between 2004 and 2007 the cost of power would have increased by up to 12 percent if wind had not been available on the system.


Where wind production is increased, units burning fossil fuel will have their input price reduced because the inclusion of wind reduces demand for fossils. Thus there is a leverage effect on the value of each unit of electricity made from wind. It does not just have a very low marginal cost; it lowers the cost of every other unit of fossil fired electricity as well.


One of the greatest benefits of wind power is that it reduces our exposure to fuel price volatility. Energy security considerations generally focus on the threat of abrupt supply disruptions, such as Russia’s closure of its gas pipeline to the West. However, there is another aspect of energy security: the risk of unexpected fossil fuel price increases. Energy security is reduced - and prices increased - when countries hold inefficient portfolios that are overexposed to fossil price risks. Diversifying a country’s generation portfolio by growing the supply of wind energy increases energy security and serves to lower the overall generation portfolio cost - again reducing electricity prices.


Opponents of renewable energy have been allowed to frame the debate around the economics of wind power by concentrating on its high capital cost, rather than its low and stable fuel cost, the benefits it brings in terms of lower energy market prices and its contribution to energy security. Maximizing the opportunity to develop large-scale wind resources will have clear, long-term, sustainable benefits for our economy and for domestic and commercial electricity consumers. Wind energy means lower bills; it’s as simple as that.


About Mainstream Renewable Power:

Mainstream Renewable Power, based in Dublin, Ireland, was founded in February 2008 by Dr. Eddie O’Connor and Mr. Fintan Whelan, former chief executive and corporate finance manager of Airtricity. Its core business is to develop, build and operate wind energy, solar thermal and ocean current plants by partnering with governments, utility companies, developers and investors across North America, South America, Europe and South Africa.


Since its inception, Mainstream has:

  • Actively engaged in development opportunities, onshore in Canada, the U.S., Chile, and South Africa as well as offshore in the U.K., Ireland & Germany.

  • Established offices in Berlin, Chicago, Dublin, London, Santiago and Toronto.

  • Raised euro 72 million in equity, including euro 20 million from Barclays Capital for a 14.6 percent stake in the company.

  • Raised a further euro 26 million in Loan Notes through Dolmen Corporate Finance in December 2008.

  • Signed a $1 billion joint venture to build a 400 megawatt pipeline in Chile.

  • Signed a CAD$840 million joint venture to build a 400 megawatt pipeline in Canada.

  • Announced a joint venture with South African wind farm developer, Genesis Eco-Energy, to build an initial pipeline of over 500 megawatts of wind energy by 2014.

  • Awarded the exclusive right to develop a 1.1 billion pounds Sterling offshore wind farm in Scottish territorial waters, with a potential capacity of 420 megawatts.

  • Appointed Fintan Drury as chairman of its Board, which also comprises Sir Roy Gardner (U.K.), former head of Centrica, Chuck Watson (U.S.) of Eagle Energy Partners, Mark Brown (U.K.) of Barclays Capital, Brendan Halligan, chairman of Sustainable Energy Ireland and John Lavery of Lavery Kirby Gilmartin Solicitors.

  • Assembled a team of almost 100 managers and staff, who have a combined experience of over 250 years in the renewable energy industry.


    For more information, visit http://www.mainstreamrp.com/


    Contact:

    Olivia Mata of Edelman for Mainstream Renewable Power

    01 01 312 240 2913

    olivia.mata@edelman.com

  • Customers of Pepco Holdings Inc. to Manage Energy Use and Carbon Footprint with Aclara Software

    WELLESLEY, MA – August 6, 2009 – Pepco Holdings Inc. (PHI) will deploy software from Aclara, part of the Utility Solutions Group of ESCO Technologies Inc. (NYSE:ESE), to help its customers understand how they are using energy as well as how their usage affects the environment. The utility will employ Aclara’s load and rates analysis and carbon-footprint calculator modules to allow customers to view data about their electric and gas usage as well as calculate their carbon footprints.


    PHI will implement the load and rates analysis module in 2009 to its Delmarva Power service area in Delaware, but plans to extend the module to all of its 1.9 million customers by 2013. The carbon footprint module will be available for all PHI customers immediately.


    The load and rates analysis module provides charts that illustrate hourly and daily electric and gas use. The module takes into account attributes such as weather, average usage, weekend versus weekday usage, and on-peak or off-peak time periods. In addition, the module offers a rate-comparison calculator that allows customers to perform what-if analysis on various alternatives such as time-of-use rates. It also will estimate a customer’s bill at any time in the month based on the last bill and current data from the advanced metering infrastructure system.


    The carbon-footprint calculator determines the environmental impact of customers’ usage using data they input into the system about energy, water, transportation, and waste. Both modules help educate customers, supplying the information they need to take action to reduce their bills.

    The new software also will benefit customer-service representatives, who will have access to information about individual customer’s gas and electric usage during billing calls. The information will help them consistently explain billing fluctuations to customers as well as identify strategies to lower their bills.


    “PHI is on the leading edge of using advanced metering technologies to deliver customer-focused solutions to help control energy bills,” said Senior Vice President of Operations, Michael Sullivan. “By moving forward with these software applications, which present real, actionable information to customers, we are building a platform to achieve this goal.”


    Aclara also provides technology for PHI’s Energy Know How Solutions program. The software used today allows customers to analyze their bills and determine how specific appliances such as water heaters and air conditioning systems are affecting their energy use. In addition, the application offers tips on how to reduce energy use by replacing outmoded electrical systems and appliances.


    Contact:

    Nancy E. Talley

    Marketing Communications Manager

    216-896-8657

    ntalley@aclara.com


    About Aclara

    The Aclara brand represents the industry’s leading Intelligent Infrastructure™ technologies for providing device networking, data-value management, and customer communications to water, gas, and electric utilities globally. More than 500 utilities in nine countries rely on proven Aclara solutions to connect with their customers. Aclara is part of the Utility Solutions Group of ESCO Technologies Inc. (NYSE: ESE), St. Louis. Capturing data. Liberating knowledge.™ www.Aclara.com.

    Wisconsin Kenworth ‘Clear Choice’ Event Showcases Kenworth Product Line, SCR Technology

    MADISON, Wis., August 4, 2009 – Customers tested Kenworth on-highway and vocational trucks equipped with Cummins 2010-compliant engines and Kenworth diesel-electric hybrid trucks and learned more about coming 2010 engine technology during Wisconsin Kenworth’s Clear Choice, a one-day customer event recently held at the Wilderness Resort in Wisconsin Dells.


    Nearly 175 customers attended and learned more about Kenworth’s latest vocational model – the T470 now in production – and innovative technologies that offer enhanced reliability, productivity and fuel economy in their fleet operations. Key presentations covered 2010 Cummins engines and SCR (selective catalytic reduction) technology, Eaton’s role in Kenworth diesel-electric hybrid trucks, and diesel exhaust fluid (DEF) and its distribution.


    Bill Kozek, Kenworth general manager and PACCAR vice president, provided an industry update and an overview of Kenworth’s continuing efforts to enhance its line of truck products. Kozek then joined Brian Lindgren, Kenworth’s director of vocational sales; Jared White, Kenworth Great Lakes regional sales manager; and Patrick Dean, Kenworth engineering program manager; for a question-and-answer session with seminar attendees.


    “Customers received a closer look at the technology that will meet the 2010 Environmental Protection Agency’s diesel-engine emissions regulations, and provide the engine reliability they seek,” said Jim Moeller, president of Wisconsin Kenworth. By 2010, all new engines must achieve just 0.2 grams per hp-hour emissions of nitrogen oxide (NOx), a greenhouse gas- and smog-causing compound, to meet 2010 emissions standards. PACCAR and Cummins engines will accomplish this through SCR technology.


    “This event gave customers the chance to learn first-hand how SCR technology will achieve up to a 5 percent improvement in fuel economy while meeting EPA regulations,” Moeller said. “It also gave them the opportunity to learn more about steps being taken to ensure an adequate supply and distribution of diesel exhaust fluid (DEF).”


    The event’s Ride and Drive featured the Kenworth T270, Kenworth T660, Kenworth T800, and Kenworth T2000 in various configurations. The T270 applications included a pickup and delivery hybrid, van body, and landscape unit. The Class 8 product, all equipped with 2010-compliant Cummins ISX engines, featured a T800 milk truck, a T800 day cab, T660 38-inch AeroCab(R) sleeper, and T2000 75-inch Aerodyne(R) sleeper. On display were three T660s and a T270 hybrid with van body.


    Paul Peardon, production and rental manager for Giuffre Bros. Cranes, and Tom Pydo, general manager for Rands Trucking, said after attending the event they feel more confident about choosing Kenworth trucks and SCR technology to meet the new federal emissions standards. They said they also appreciated the opportunity to ask questions, hear presentations, and get a close look at different Kenworth models, including the diesel-electric hybrid.


    Peardon said his overall impression with Wisconsin Kenworth’s Clear Choice event was an “11 out of 10 stars. It was professionally run, the people were very friendly and knowledgeable and it allowed me to get a first-hand look at technologies that Kenworth has to offer.”


    Peardon said his company has been considering purchasing Kenworth trucks for some time. The Milwaukee-based company equips truck chassis with 17-ton to 35-ton cranes and booms for use in construction, roofing, excavation and utility operations.


    “We’re particularly interested in the new Kenworth T470 because it seems ideally suited for our market,” Peardon added. “The combinations of axle capacity with the T470 offer us opportunities that did not exist before. We’re also looking at purchasing a hybrid diesel-electric Kenworth T270, installing a boom and using it as a rental model and demonstration unit. We’re really excited about the opportunities the hybrid Kenworth could present to our customers because of the fuel savings and noise reduction it offers over a standard model.”


    Pydo said he found the Clear Choice event to be very informative. Ladysmith, Wis.-based Rands Trucking is a dedicated carrier for a major door and window manufacturer. Pydo said his company recently received its first Kenworth T660 with a 72-inch sleeper, 450-hp Cummins ISX engine and 10-speed direct transmission and has more T660s on order.


    “It made me feel good to know that the people at Kenworth are knowledgeable about the issues and are willing to provide their customers an objective look at how these new technologies will help them in the long run,” Pydo said. “It made me feel more confident about the decisions we’ve made in choosing Kenworth.”


    About Kenworth Truck Company

    Kenworth Truck Company is the manufacturer of The World’s Best(R) heavy and medium duty trucks. Kenworth is an industry leader in providing fuel-saving technology solutions that help increase fuel efficiency and reduce emissions. The company’s dedication to the green fleet includes aerodynamic trucks, medium duty diesel-electric hybrids, liquefied natural gas trucks, and the Kenworth Clean Power(R) no-idle system. This year, Kenworth became the first truck manufacturer to receive the Environmental Protection Agency’s Clean Air Excellence award in recognition of its environmentally friendly products. In addition, Kenworth is the recipient of the 2008 J.D. Power and Associates awards for Highest in Customer Satisfaction for Over the Road and Vocational Segment Class 8 trucks. Kenworth’s Internet home page is at www.kenworth.com. Kenworth is a PACCAR Company.

    American Electric Power Awards Sun-Net Outage Coordination Software Contract

    San Jose, California July 22, 2009 — Sun-Net Corporation announced it has been awarded AEP’s Outage Coordination, Switching & Logging Enterprise software contract for Sun-Net’s Transmission Outage Application (TOA) suite products.


    AEP ranks among the nation’s largest generators of electricity, owning nearly 38,000 megawatts of generating capacity in the U.S. AEP also owns the nation’s largest electricity transmission system, a nearly 39,000-mile network that includes more 765 kilovolt extra-high voltage transmission lines than all other U.S. transmission systems combined. AEP’s transmission system directly or indirectly serves about 10 percent of the electricity demand in the Eastern Interconnection, the interconnected transmission system that covers 38 eastern and central U.S. states and eastern Canada, and approximately 11 percent of the electricity demand in ERCOT, the transmission system that covers much of Texas. AEP’s utility units operate as AEP Ohio, AEP Texas, Appalachian Power (in Virginia, West Virginia), AEP Appalachian Power (in Tennessee), Indiana Michigan Power, Kentucky Power, Public Service Company of Oklahoma, and Southwestern Electric Power Company (in Arkansas, Louisiana and east Texas). AEP’s headquarters are in Columbus, Ohio.


    “TOA will be used in AEP’s six Transmission Control Centers and seven Distribution Control Centers across 11 states. It will help AEP streamline and unify its outage coordination process, process switching orders and give system operators an efficient tool in logging for real-time operation. TOA will also help on NERC compliance. Sun-Net is very proud to have AEP join our user family of over 28 utilities in North America.” said Daniel Sun, Principal of Sun-Net in San Jose, California.


    Contact:

    Daniel Sun

    Phone: 408-323-1318

    E-mail: info@sncsw.com

    Web site: http://www.sncsw.com

    HD Electric Company Launches New Web Site

    August 17, 2009 — HD Electric Company has launched a new Web site. The new site showcases all of the company’s manufactured products.


    Some new features allow visitors to:


    Request a copy of HD’s Short Form Product Catalog. If you fill out a form, the catalog will be mailed that same week.

    Search for sales reps. The company’s upgraded Rep Locator page makes it even easier to locate and contact its Sales Reps.

    Search for products by name, description, etc. Our new search function allows product pages to be found even faster.

    Download all product literature, manuals and articles.

    Latest news. Upgraded with photos and the ability to view past latest news items.

    View product videos. Product videos will be uploaded to the product page for access anytime, any day.


    To view the new Web site, visit www.HDElectricCompany.com.


    Contact:

    HD Electric Company

    1475 Lakeside Drive

    Waukegan, IL 60085 USA

    847-473-4980 – phone

    847-473-4981 – fax

    www.HDElectricCompany.com

    About

    At the Briefing Room you will be able to stay up-to-date on the latest technology announcements where we will provide daily postings from our industry sources. Here you can check out the full range of vendor-supplied information including product releases, business development activity, career advancements and new literature.

    Calendar

    March 2010
    M T W T F S S
    « Feb    
    1234567
    891011121314
    15161718192021
    22232425262728
    293031  

    Your Account

    Subscribe

    Subscribe to RSS Feed

    Subscribe to MyYahoo News Feed

    Subscribe to Bloglines

    Google Syndication